Penguin Chillers 1/2 HP Water Chiller

The Penguin Chillers 1/2 HP Water Chiller is a reliable and precise chiller designed to maintain the perfect temperature for your ice bath. With a cooling power of 5,000 BTU/hr, this chiller can keep your cold plunge at temperatures as low as 37 °F, even in the summer heat.

Operating the chiller is incredibly easy. Simply plug it in using its 6-foot power cord, and it will run efficiently on 110-120 volts, drawing only 3.9 amps and consuming a mere 450 watts. Additionally, this chiller has an operational sound level of only 56 dBA, making it very silent.

For those interested in setting up a DIY cold plunge setup, this chiller can be used in combination with a pump, tubing, and filters. The Danner Mag-drive pump with a flow rate ranging from 950gph to 1800gph is recommended, and any highly-rated 10-inch filter housing + 50 micron filters will be perfect for filtering your water. If alternative pumps are preferred, particularly those rated in horsepower, technical support is available to guide users in ensuring compatibility with the chiller.

For optimal control over water temperature, the digital controller consistently monitors incoming water temperature. If the temperature goes above the set point, the chiller activates, and once the desired temperature is achieved, it turns off, ensuring energy efficiency. 

This 1/2 HP chiller is perfect for those looking for a premium quality cold plunge chiller at an affordable price.

1/2 HP Water Chiller Features:

The Penguin Chillers 1/2 HP Water Chiller is a powerful and efficient cooling system designed for water temperature regulation. Here are some of its notable features:

• Compact Design: With dimensions of 16.25”W x 14.75”D x 12”H and a weight of 39 pounds, this chiller is both space-saving and easy to install.
• Powerful Cooling: Delivering a respectable 5,000 BTU/hr, it ensures consistent and efficient water temperature regulation.
• Digital Controller: The included controller constantly monitors the water temperature and activates the compressor and fan to begin dropping the water temperature when it goes higher than the desired level.
• Optimal Connectivity: Equipped with 1" NPT inlet/outlet ports that offer seamless connectivity and straightforward installation.
• Energy Efficient: Operating on 110-120 volts and consuming only 450 watts, it's designed for optimal energy conservation without compromising performance.
• Quiet Operation: With a sound level of just 56 dBA, it ensures effective cooling without the annoying noise.
• USA Proud: Manufactured with precision and pride in the USA, this chiller promises reliability and top-notch quality.
• 1-Year Warranty: Enjoy peace of mind with the comprehensive 1-year product warranty, emphasizing the manufacturer's confidence in the product's durability and performance.

Overall, the Penguin Chillers 1/2 HP Water Chiller is a reliable and high-quality cooling system that delivers powerful and efficient water temperature regulation. Its compact design, digital controller, and optimal connectivity make it easy to install and use, while its energy-efficient and quiet operation ensure effective cooling without compromising performance.

Specifications

• This chiller has dimensions of 16.25”W x 14.75”D x 12”H and weighs only 39 pounds, making it a perfect fit for your cold plunge setup without taking up unnecessary space.
• The chiller produces 5,000 BTU/hr of cooling power and has a sound level of 56 dBA.
• The recommended Danner Mag-drive pump is 950-1800 gallons per hour
• Features 1" NPT inlet/outlet ports, making it easy to connect to a tub. The power source is a single-phase 110-120 volts, 3.9 amps, and 450 watts.
• Chiller comes with a titanium heat exchanger, digital controller, and 6-foot power cord.

Water Chiller Comparison Chart

If you're not sure which water chiller is right for you, the following comparison chart can help you make an informed decision: